Aluminium, Steel, Glass and Wood Testing Laboratory in Dubai, UAE

building wall

Aluminium Composite Panels, Insulting & Cladding materials, Glass, Wood & wood based panels.

We at TestHub Laboratories perform a wide range of tests on all major building materials used in construction. We can perform all major tests on wood, ACP panels, Aluminum Sheets, Steel Products.The Main tests conducted on Wood & wood based panels(particle Board,plywood,blackboard,doors) are as follows.

Testing can be carried out on:

Some of the tests on Aluminium Composite panels that we can perform are

FAQ

Aluminium can be tested using a variety of methods, including:

  • Tensile strength test: This test measures the ability of aluminium to resist tearing.
  • Impact strength test: This test measures the ability of aluminium to resist breaking when it is struck.
  • Flexural strength test: This test measures the ability of aluminium to resist bending.
  • Hardness test: This test measures the resistance of aluminium to indentation.
  • Corrosion resistance test: This test measures the resistance of aluminium to corrosion.
  • Weldability test: This test measures the ability of aluminium to be welded.

The specific tests that are performed will depend on the type of aluminium and the desired results.

Steel can be tested using a variety of methods, including:

  • Tensile strength test: This test measures the ability of steel to resist tearing.
  • Impact strength test: This test measures the ability of steel to resist breaking when it is struck.
  • Flexural strength test: This test measures the ability of steel to resist bending.
  • Hardness test: This test measures the resistance of steel to indentation.
  • Corrosion resistance test: This test measures the resistance of steel to corrosion.
  • Weldability test: This test measures the ability of steel to be welded.

The specific tests that are performed will depend on the type of steel and the desired results.

Wood testing is the process of evaluating the properties of wood. This testing is important to ensure that wood products meet the required standards for quality and safety.

Wood can be tested for strength using a variety of methods, including:

  • Tensile strength test: This test measures the ability of wood to resist tearing.
  • Impact strength test: This test measures the ability of wood to resist breaking when it is struck.
  • Flexural strength test: This test measures the ability of wood to resist bending.
  • Hardness test: This test measures the resistance of wood to indentation.
  • Compression test: This test measures the ability of wood to resist compression.
  • Shear test: This test measures the ability of wood to resist shear forces.

The specific tests that are performed will depend on the type of wood and the desired results.

Start typing and press Enter to search